Everyone knows the oxygen blowing tube, and everyone knows the application of the coated oxygen blowing tube in life. It is so widely used, of course, it is inseparable from its technology. What equipment does Liaoning magnesia chrome brick make? You know? Let's take a look
The coated oxygen blowing tube is heated before piercing or rolling. The distribution form in the furnace can heat the tube billet on three sides, and the heating temperature is uniform, so as to meet the temperature requirements of rolling a uniform wall thickness coating oxygen blow tube; at the same time, the ring furnace can hardly heat the round billet, so the tube rolling mill generally uses the ring furnace Steel ingots for heating tube billets or rolling tubes.
Refractory
Coated oxygen lance walking furnace is a kind of furnace that moves the coated oxygen lance in the furnace step by step by moving the walking beam up, forward, down and back. It is used for heating the coated oxygen lance before sizing, reducing or expanding, and it is also used for the heat treatment of the coated oxygen lance. A zigzag fixed beam and a walking beam are installed in the furnace, and a seamless oxygen-blowing tube is placed in each slot. Each stepping action makes the coated oxygen-blowing tube move forward by one pitch, using the unequal tooth pitch and step pitch. It can make the coated oxygen blowing tube roll on the tooth surface to make the heating uniform. Coated oxygen blowing tube step-by-step furnaces generally adopt side-feed and side-discharge methods. There is a row of cantilever rollers on the feed side and the discharge side of the furnace for charging and discharging. Converter magnesia carbon brick
The development of science and technology has promoted the development of coated oxygen lances to move to the coastal area. The technology of coated oxygen lances is inseparable from its equipment. I believe that if this development continues, coated oxygen lances will be applied. More and more extensive.
